The Printer Doctor - Good afternoon all the printer doctor friends, this time the printer doctor will share with friends all about how to deal with B200 errors on Canon IP2770 printers. If you are a user of this printer and are currently experiencing problems with B200 error messages then you are very lucky to get lost in the right place. Here I will share tips on how to overcome this. If you are interested, then I suggest reading this article as a whole, so you can easily practice it later. Okay, right ...
INITIAL INDICATION:
When the printer wants us to use to print a document, an error message appears on our monitor / LCD screen with the message ERROR B200 as shown below.
Then marked by the presence of blinking on the printer indicator light, then when we see the cartridge house is not moving. This problem arises due to several things:
- ERROR B200 because OVER HEAD, how to find out B200 because of OVER HEAD by turning off the printer, remove the printer cover above, we turn on the printer then we see whether the cartridge house is moving or not if it turns out to be motionless because OVER HEAD. How to solve this problem by removing the cartridge and we attach the used cartridge / other, if it is normal then we return the cartridge that we just released.
- ERROR B200 due to the lack of stable power supply voltage that supplies voltage to the mainboard. How to fix it Replace with a new Power Suplay.
- ERROR B200 due to the damaged mainboard and this is what happens a lot, this mainboard error is usually caused due to a faulty component. The experience of a printer printer component that is often damaged is found on a resistor with a code on the R301 mainboard. How to fix Find a resistor with the R301 code and replace it with a new one. below this part of the damaged mainboard is what the printer doctor circled with the arrow pointing up.
So, the tutorial from the printer doctor hopefully can benefit all my friends, and finally good luck, good luck ..., THANK YOU ... :)