THE PRINTER DOCTOR - Canon MP 287 printer is a type of Canon multi function printer that is in great demand, besides printing this printer is equipped with a scanner device that can scan and photocopy with a fairly cheap cost. This printer also has other advantages, that is when the MP287 printer has a problem, then it has an error code, which with the code code description, we are faster to be able to overcome it if the printer is cranky, fever or enter the wind ... (he ,, hehe,,,).
Okay For this time the printer doctor will share with you all about the various MP287 printer error codes and of course how to fix them:
1. E02: The printer runs out of paper (Print is out of paper) or the paper might not go well
- How to deal with: Love paper and place it well.
2. E03: The paper jams or the paper exit is closed.
- Solution: Place the paper properly in its position or open the place where the paper is still closed.
3. E04 or E05: Your cartridge is not detected or is not recognized by the printer (The fine cartridge can not be recognized), or it can be a dirty cartridge because it has ink overflow /
- How to deal with: Take the cartridge when exposed to ink on the pin clean it with a tissue given 70% alcohol then install it again with the right position.
4.E07: The cartridge is not installed in the correct position in its position (The Fine Cartridge is not installed in the Correct Position)
- How to deal with: Check whether the black cartridge and color are installed correctly.
5. E08: Ink Absorber is Almost Full or in our language the maximum printing limit has been reached.
- How to solve: The printer must be set to (0) for how to see here
6. E13: The Remaining Ink Level can not be detected or can mean that our ink indicator has run out or another term RUN OUT.
- Solution: Press the STOP / RESET button for more than 10 seconds.
7. E14: The cartridge is not recognized or detected (The Fine Cartridge can not be Recognized).
- How to overcome: Try to see the cartridge if there is ink overflowing on the pin and clean it, but if not the cartridge dies replace the old cartridge with a new one.
8. E15: The cartridge is not recognized or detected (The Fine Cartridge can not be Recognized).
9. E16: The Ink has Run Out.
- Solution: Press the STOP / RESET button for 10 seconds.
10. E30: The document is too small when "Fit Copying is Selected".
- Solution: Check the domen on the scanner glass.
11. E31: The printer is not connected to a computer (The printer is not connected with a computer).
- Solution: Check the cable and connect the printer cable to the computer device or replace the printer cable with a new one.
12. E50: indication of Scanning the print Head Alignmen sheet has failed.
- Solution: press the STOP / RESET button and make sure the paper loaded matches the print head alignment and the paper is in the correct position and not dirty.
Then when your printer lights blinking in green and the orange blinking alarm lights alternately, usually on the LCD printer, the display will show below:
1. P02: Cancel printing and turn off your printer then see if the printer mechanic is dirty or there is a torn paper, if there is a take and clean it, or another possibility your cartridge is damaged and needs replacement.
2. P10: Turn off the printer and turn it back on, if you don't want it to be used for Hospitalization and with expert analysis.
So Explanation of the error code code on the printer MP287 and how to overcome it, the author hopes that this article can be useful and understandable, finally see you again in another printer doctor article, Wassalamu'alaykum .......